Slipping for DIY
Clean, controlled haul-outs for craft up to 40 feet, with cradle and blocks set to the hull and secure hardstand storage while works are underway.
Full-service slipways within Aquarama Slipways - slipping, antifouling, fibreglass and timber repairs, spray finishing and insurance work.
Located within the Aquarama Marina, Aquarama Slipways provides slipping for craft up to 12 metres. We will carry out anti-fouling, repairs in either fibreglass or timber, along with spray painting (all types), polishing and insurance work.
Clean, controlled haul-outs for craft up to 40 feet, with cradle and blocks set to the hull and secure hardstand storage while works are underway.
Full hull preparation and two-coat antifoul systems matched to your moorage and use pattern. Anode checks included on every lift.
Gel-coat chips through to structural laminate work — colour-matched, faired back and finished to original standard.
Propspeed creates a slippery barrier that sheds biofouling from your running gear.
All paint systems — two-pack topside finishes, cove lines, boot tops and transom detail applied in a controlled environment.
Cut-and-polish detailing that lifts older gel-coat.
Aquarama Slipways has been looking after East Fremantle's boats from inside Aquarama Marina for decades. The yard is set up for craft up to 12 metres, covering everything from a quick antifoul and polish to major fibreglass and timber restoration. Because we sit inside the marina, vessels can come straight off the water, onto the hardstand, and back onto the pen without moving between yards.
We slip craft up to 12 metres (roughly 40 feet) in length overall. For vessels larger than 12 metres, we carry out work at Fremantle Sailing Club, which is our preferred yard for bigger jobs.
Yes. We handle insurance repairs from quote through to completion, including liaison with your insurer and detailed work reports.
Our preferred antifouling paint is International Micron Extra 2 for superior results in local water, however we are happy to apply any paints supplied by the customer.
Yes. We handle gel-coat colour matching for fibreglass repairs, and apply all two-pack topside paint systems, cove lines and boot tops.
No, we service boats from all over - we will arrange a drop off time for you to bring your boat to the marina and we'll take care of the rest.
Depending on the scope of the work, we always endeavor to have boats back in as soon as possible.